Add an Additional Delay to Browse Packets (pcAnywhere) (All Windows)
Category: Home > Software > pcAnywhere
Use this setting when remotes display an incomplete list of TCP/IP hosts in the host list over a WAN or LAN connection.
The entry allows you to set the amount of delay used to create the remote's browse list. Technically, it adds 0.01 seconds between broadcast packets, and waits one additional second for the host's response for each unit of delay set.
For example, a setting of 2 means wait .02 additional seconds between each packet and an additional 2 seconds to receive the response from those broadcasts.
If you are having problems over a WAN connection, start with a setting of 1. If the setting does not work correctly, increase the number until the entire host list is displayed.
| Settings: |
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\pcANYWHERE\CurrentVersion\System]
Name: TCPIPBrowseDelay
Type: REG_DWORD (DWORD Value)
Value: Delay in Milliseconds
|
Disclaimer: Modifying the registry can cause serious problems that may require you to reinstall your operating system. We cannot guarantee that problems resulting from modifications to the registry can be solved. Use the information provided at your own risk.
Last Modified: March 1, 1999
| 
