Remote Access Service (RAS) Device Logging (Windows NT/2000)
Category: Home > Windows > Troubleshooting > Logging
Creates a file called DEVICE.LOG in the %SYSTEMROOT%\SYSTEM32\RAS folder for information about commands that the modem is sending and errors that are reported. This file can be very useful in debugging RAS failures.
Open your registry and find the key below.
Create a new DWORD value, or modify the existing value called 'Logging' using the settings below.
Exit your registry, you may need to restart or log out of Windows for the change to take effect.
 |  |  |  |  |
|  | (Default) | REG_SZ | (value not set) | |
|  | Logging | REG_DWORD | 0x00000001 (1) | |
 |
| HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\Parameters |  |
 |
| Settings: |
System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\Parameters]
Name: Logging
Type: REG_DWORD (DWORD Value)
Value: (0=disable, 1=enable)
|
Disclaimer: Modifying the registry can cause serious problems that may require you to reinstall your operating system. We cannot guarantee that problems resulting from modifications to the registry can be solved. Use the information provided at your own risk.
Last Modified: August 16, 2002
| 
